Your gas chainsaw is a very powerful tool. It is very important for it to operate properly. You will need to do things to keep it in good running condition. Here are some tips to keep you safe and running smoothly.
It is very important that you have the proper fuel mixture for your chainsaw. If you do not have enough oil in the fuel, you engine can be ruined. It will not get proper lubrication. You do not want too much oil in the fuel either. This may make it run poorly and foul the spark plug. Some models like the Husqvarna chainsaws, offer oil already measured for you. This makes fuel mixing simple. It also means that you will always have the proper fuel.
Always check your chain before using your saw. If your blade is getting dull, make sure that it is sharpened. There should not be too much slack in the chain. You will need to adjust the tension regularly. Not all chainsaws will adjust the same. Some may be different from other models. Check with the information that came with your saw, to be certain.
The chain bar needs to be inspected regularly. You should rotate it about every ten hours of running time. When your saw runs, the chain will wear more at the bottom of the chain bar. When you rotate the bar, it changes the top and bottom positions. Be sure that you clean the bar before each use.
Your chain has an oil system. Oil must be allowed to get to the chain. Make sure that the holes are clean and free of debris. Sometimes, sawdust or twigs can get in the chain. This material must be removed. Too much debris can make the chain jump from the bar. It also will clog your oiling holes. If the chain cannot get lubrication, it will wear out quickly. After you have cleaned the saw, clear you work area.
You may be using an inside workspace. All of that saw debris contains oil. It can be a safety hazard. Make sure that you clean it up with something like a shop vacuum. Although a Dyson upright vacuum cleaner will work, shop vacuums are better equipped for the job.
Make sure that all bolts and screws are tight. Do this before every use. Your saw will vibrate as it runs. This can make things loosen.
Make sure that your air filer stays clean. These may be different on some models like the Poulan chainsaw. If you are uncertain, check with the manufacturer of your saw.
In closing
When you use a gasoline powered chainsaw, you operate powerful outdoor equipment. Proper maintenance will keep it running smoothly. It will also help you keep safe from possible injury.
Mail this post
